1 Component Expanding Foam

1-component mounting and filling foam for single application

Outstanding adhesion to virtually all construction surfaces
Improved sound and heat insulation characteristics over mineral wool, cork and fibreglass
Quick to fully harden
Resistant to a large number of solvents, paints and chemicals
Resistant to ageing and not-rotting
Notice
Does not adhere to PE, PP, PTFE and silicone. Not UV-resistant.

Application area
Safe insulation, filling and insulating of window joints, roof finishing, door frames, pipe openings, joints, wall joints, roller shutter boxes, wall openings and cavities etc. Adheres to concrete, stone, hard PVC, metal and wood.

Instructions
The surfaces must be clean, solid and free from dust and grease. Pre-treat highly absorbent surfaces. Adhesion surfaces must be moistened with water before the foam is applied.

Screw the enclosed adapter tube onto the valve and shake the can vigorously, with the valve facing downwards, approx. 30 times so that the contents of the can are well mixed and the foam quality is optimised. Only fill the joints or cavities to approx. 1/3 with foam because the foam will expand. Moisten again if several foam beads are applied. Immediately remove fresh foam splashes with PURLOGIC® Clean and remove foam residue that has already hardened with PURLOGIC® foam cleaner. Cut away excess, fully hardened foam with a knife.