Diamond Cutting Disc 300mm

Diamond cutting disc asphalt hand/joint saw.

Diamond cutting disc developed for road construction
Special protective segments protect the main blade against undercut
Notice
Diamond cutting discs become blunt at excessively high rotation speeds and wear too rapidly at insufficient peripheral surface speeds
If ease of cutting is lost (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts
Cut larger workpiece cross-sections into several sections (swing cut)
Work without applying pressure – the weight of the machine is sufficient. Increased pressure causes increased wear.
Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs – risk of injury!
Despite the level of safety offered by the tool, always wear safety glasses and clothing while working
Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions
The direction arrow on the disc must match the machine’s direction of rotation
Must not be used for lateral grinding
Use the appropriate protective hood
Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)
If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury

Application area
For hand-held cutters and floor saws
For dry and wet cutting
For tarmac, concrete (abrasive), young concrete, mortar, plaster, screed, soft sand-lime brick

Diameter (Ø)

300 mm

Drill hole

20 mm

Segment height

10 mm

Segment thickness

3 mm

Number of segments

18 PCS

Segment connection

Laser

Max. rotation speed

6400 rpm

Max. circumferential speed

100 m/s